Bend Mining Hose
Free Cut Mining Hose is a straight tube hard wall hose with an integrally constructed end connection. The other end of the hose can be plain or with a split sleeve fitting.
This type of hose is used when the distance from pipe to pipe cannot be accurately measured. Mining hoses can be cut to length in the field and retrofitted into the pipeline with casing couplings. The pressure rating of the hose is based on the pressure rating of the casing joint.
- Technical Parameter
- Dimensional data sheet
- Downloads
Brand: FENGCHI
Model: SH-B series
Nominal diameter: DN50~1200
Hose length: customized on request
Bending angle: 30°, 45°, 60°, 90° or customized
Pressure level: 0~5Mpa
Temperature: -20℃~90℃
Connection method: flange
Flange type: GB, ANSI, BS, JIS, etc.
Lining: Wear-resistant, corrosion-resistant, high-temperature resistant rubber optional
Reinforcement layer material: reinforced fiber cloth
Shell material: UV-resistant, ozone-resistant rubber
Connection material: carbon steel, stainless steel, etc.
| Size | Standard thickness | Max thickness | Standard pressure | Max pressure |
| DN | mm | mm | kpa | kpa |
| 50 | 6 | 6 | 1000 | 5000 |
| 80 | 6 | 9 | 1000 | 5000 |
| 100 | 6 | 12 | 1000 | 5000 |
| 125 | 6 | 12 | 1000 | 5000 |
| 150 | 6 | 12 | 1000 | 5000 |
| 200 | 6 | 12 | 1000 | 5000 |
| 250 | 9 | 15 | 1000 | 5000 |
| 300 | 9 | 19 | 1000 | 5000 |
| 350 | 9 | 19 | 1000 | 5000 |
| 400 | 12 | 19 | 1000 | 5000 |
| 450 | 12 | 19 | 1000 | 5000 |
| 500 | 12 | 19 | 1000 | 5000 |
※ Products are fully customizable, with non-standard specifications available upon request.
※ Standard hose thicknesses are recommended for general slurry applications.