Tee Ceramic Hose
Y-Tube/Transverse/Tee Ceramic Hose are Y-sections designed to transfer material from a single pipe to two pipes or combine two materials into a single pipe. The hose is manufactured at a pre-specified angle to help reduce piping requirements.
Ceramic hoses are designed for applications with severe wet sliding wear and erosion that can quickly wear out conventional rubber mining hoses.
- Technical Parameter
- Dimensional data sheet
- Downloads
Brand: FENGCHI
Model: CH-Y series
Nominal diameter: DN80~400
Hose length: customized
Pressure level: 0.1~5Mpa can be customized higher according to requirements
Temperature: rubber + ceramic -30℃~90℃
Connection method: flange, thread, etc.
Flange type: GB, ANSI, GOST, JIS, etc.
Additional options: branches, wear detection system (plug-in or push-button)
Lining: Wear-resistant, corrosion-resistant, high-temperature resistant rubber optional
Reinforcement material: Synthetic fabric and wire
Shell material: UV-resistant, ozone-resistant rubber
Connection material: carbon steel, stainless steel, etc.
| Size | Standard thickness | Max thickness | Standard pressure | Max pressure |
| DN | mm | mm | kpa | kpa |
| 80 | 4.5 | 4.5 | 1000 | 5000 |
| 100 | 4.5 | 6 | 1000 | 5000 |
| 125 | 4.5 | 6 | 1000 | 5000 |
| 150 | 4.5 | 6 | 1000 | 5000 |
| 200 | 4.5 | 12 | 1000 | 5000 |
| 250 | 4.5 | 12 | 1000 | 5000 |
| 300 | 4.5 | 12 | 1000 | 5000 |
| 350 | 4.5 | 12 | 1000 | 5000 |
| 400 | 4.5 | 12 | 1000 | 5000 |
※ Products are fully customizable, with non-standard specifications available upon request.
※ Standard hose thicknesses are recommended for general slurry applications.